Philips AZ1018 Mode D'emploi page 11

XP AZ 1018/17
CD Player
Display indication
– Cd
OPEN
– d1SC: when reading CD contents
– In stop mode: total track number and
total playback time
– During CD playback: elapsed
playback time of current track and
current track number
– Pause: elapsed playback time freezes
and flashes
–
SHUFFLE
respective mode is activated
–
PROGRAM
P ro g also appears briefly when you
store a track
– no SEL: program activated but no
tracks selected
– FULL: program memory full
– no P ro g: program cancelled
– Err, no d1SC or nF d1SC:
error in CD operation /no disc/ or a
CD-R(W) is blank or the disc is not
finalized (see Troubleshooting)
Great user manuals database on
14-11-2000 19:17 Pagina 11
: CD door open
/ modes: when the
REPEAT
: when CD program active;
UserManuals.info
CD-Player
Playing a CD
This CD-player can play all kinds of Audio
Discs such as CD-Recordables and CD-
Rewritables. Do not try to play a CD-ROM,
CDi,VCD, DVD or computer CD.
1 Adjust the POWER slider to CD.
Display: shows Cd briefly.
2 To open the CD door, lift the CD door at
the edge marked LIFT TO OPEN.
3 Insert a CD or CD-R(W) with the printed
side facing up and press the CD door gently
close.
4 Press PLAY•PAUSE 2; on the set to
start playback.
5 To pause playback press PLAY•PAUSE
2;.To resume, press PLAY•PAUSE 2;
again.
The elapsed playback time freezes and
flashes.
6 To stop CD playback, press STOP 9.
7 To switch off the set, adjust the POWER
slider to TAPE/ position and check
OFF
the cassette keys are released.
Note: CD play will also stop when:
– you open the CD compartment;
– you select RADIO or TAPE sound
source;
– the CD has reached to the end.
11