knapp Megant 60/40 AW6082 Notice De Montage page 18

Main beam
Make sure plate marking A is at the top for main beam installation
1.)
CS 8x120
screws are usually used
for main and secondary beams made of hardwood
Secondary beam
Make sure plate marking B is at the top
for secondary beam installation
1.)
8.1
8.1
connector plate 1
Page 6/9
Install MEGANT Visible in the main and secondary beam
install horizontal screws 8
connector plate 1
2.)
8
install horizontal screws 8.1
(8x240)
2.)
7
Screw the clamping jaw 2 on top in the
positioning hole with horizontal screws 9.1 (8x240)
Assembly Instructions
MEGANT® 60
Screw inclined screws 7 into connector
plate 1 from top to bottom in rows
max. tightening torque Mt = 20Nm
(ensure they are tightened firmly)
3.)
7
Screw the clamping jaw 3 down in the positioning
hole with horizontal screws 9
Screw inclined screws 7 into connector
plate 1 from top to bottom in rows
max. tightening torque Mt = 20Nm
(ensure they are tightened firmly)
3.)
9.1
ALU AW 6082
9