Uline H-8966 Instructions D'assemblage page 3

Figure 5
Drain Basket
Rubber Gasket
Paper Gasket
Lock Ring
Figure 6
Faucet Deck
Plastic Gasket
Figure 7
Rubber Gasket
Nut with Washer
Figure 8
PAGE 3 OF 12
DRAIN AND FAUCET ASSEMBLY
Drain Basket
Turn
Clockwise
Hot Cold
Faucet
Deck
8" Faucet
Chrome Nut
1. Remove drain basket from packaging and
disassemble. Insert drain basket into hole in
the center of the sink with threads protruding
underneath top. Place drain basket rubber gasket,
paper gasket and lock ring underneath sink onto
drain basket threads and turn clockwise to secure
basket to sink. (See Figure 5)
2. Remove faucet and deck from packaging.
Disassemble faucet deck. Place plastic faucet deck
gasket over faucet holes in tabletop. Insert faucet
deck over the gasket and through holes in tabletop
with hot side knob (red) on left side. (See Figure 6)
3. Place rubber gasket and nut with washer onto
faucet deck threads protruding underneath
tabletop. Tighten firmly with tongue and groove
pliers to secure faucet deck to tabletop.
(See Figure 7)
4. Place 8" faucet onto center thread of faucet deck.
Turn chrome nut at base of faucet clockwise until
fully secured to faucet deck. (See Figure 8)
0123 IH-8966