Uline H-4779 Mode D'emploi page 2

5. Use 13 mm wrench to remove two bolts, lock washers
and flat washers on side of E-Stop that attach two
cables (C3 Cable on left and P Cable on right).
(See Figure 6)
Figure 6
6. Use 3 mm Allen wrench to remove two bolts from top
of E-Stop. (See Figure 7)
Figure 7
PAGE 2 OF 9
INSTALLATION CONTINUED
7.
P Cable
INSTALLING NEW E-STOP
C3 Cable 1.
Bolts
2. Insert E-Stop through hole in truck next to hour meter.
Pull E-Stop down to remove. (See Figure 8)
Figure 8
Unscrew red cap from new E-Stop. (See Figure 9)
Figure 9
(See Figure 10)
Figure 10
E-Stop
E-Stop
Cap
Hour Meter
E-Stop
0822 IH-4779