Uniden LightCam 35HD Guide De Départ Rapide page 2

Welcome to a new level of home security.
1.
Install LightCam App.
• The app is available on Apple Store and Google Play.
2.
Install and set up your LightCam 35HD.
• Attach power adapter to the camera and plug into power outlet.
• The LED will turn to a solid green then after 10 seconds it will switch o .
• Approximately 15 seconds later, it will begin quickly flashing green
meaning the intialization is complete.
3.
Connect your IPhone to the cameras WiFI connection (Point to Point P2P)
• Press the reset button on the back of the camera.
• When connected, choose from one of the 3 steps.
All manuals and user guides at all-guides.com
1) Search Local Network
• Open the LightCam app and click the "+" symbol to add a new camera.
• Click "Search in Local Network".
• It will automatically search the camera Device ID (DID) and display
the camera name and Device ID (DID). Enter the camera default
password: 000000 and save the password to complete the connection.
2) Scan QR Code
• Scan the QR Code on the back of the camera to retrieve the
camera name and Device ID (DID).
• Enter the camera default password: 000000 and save the password.
.
3) Manual Input
• Select Manual Input and retrieve the camera
name then input the Device ID (DID) located
on the back of the camera.
• Enter the camera default password: 000000
and save the password.
Page 1