AquaScape 45041 Instructions D'installation

I N S T A L L A T I O N
UNIVERSAL REMOTE
FOR ADJUSTABLE FLOW PUMPS
Universal Remote
Item #45041
Contents - #45041
No. Description
1. Universal Remote
2. Mounting Holster
3. (2) Mounting Screws
4. Battery (23A, 12V)
4
Instructions
INSTALLATION AND OPERATION
• Using a phillips head screwdriver,
remove the four screws on the back of
the universal remote (Ex. 1).
• Remove the back cover from the remote
and place the included battery in the
battery compartment (Ex. 2).
• Replace back cover and re-install the
four screws to secure.
NOTE: In order to control the flow of
your Aquascape adjustable flow pond
pump without the use of a smartphone
or tablet, you will need to pair the
universal remote to your pump receiver.
• The Smart Control Receiver includes
a switch that allows the pump to be
operated in the two following modes
(Ex. 3).
Position 1 – Operated by Universal
O
Remote for Adjustable Flow Pumps
or Aquascape Smart Control App
Position 2 – Bypass control and
–
operate at full flow rate
• Ensure that the receiver is set to position
1 before beginning the pairing
O
process (Ex. 3).
• Plug the Smart Control Receiver into an
outdoor rated GFCI.
NOTE: If the receiver is plugged in and
working, unplug the unit and plug it back into the outlet.
P R O F E S S I O N A L G R A D E / C L A S S E P R O F E S S I O N N E L L E
1 2
3
Ex. 1
Ex. 2
Ex. 3
I N S T R U C T I O N S
• Press and hold the "+" and "-"
buttons simultaneously for more
than 3 seconds (Ex. 4) to engage
the pairing mode (indicated by
flashing numbers on the display of
the remote).
NOTE: Depending on whether you
have a Smart Control Receiver
(#45038) or Smart Control Receiver
Large (#45039), you will need to
select the proper number setting
on the remote to continue pairing.
– Smart Control Receiver (#45038) – Set remote to "2"
– Smart Control Receiver Large (#45039) – Set remote to "1"
• Use the "+" and "-" buttons on the remote to select the proper number
setting for your receiver
• After selecting the correct number on the remote, press the power button
on the remote to complete pairing the remote to the receiver.
NOTE: Complete remote pairing process within one minute of
connecting the receiver to the power source.
• The universal remote allows for flow
adjustment between settings 1 and
10 as well as the ability to turn the
pump on/off (Ex. 5).
• For more control, including dynamic
scheduling, connect the Smart
Control Receiver to the Aquascape
Smart Control App and control the
pump from your smartphone or
tablet (see Smart Control Receiver
instructions for more information).
NOTE: The Universal Remote for Adjustable Flow Pumps has an
approximate range of 150 feet/45 meters. The range may be reduced
if there are obstacles between the remote and receiver. To control your
pump from anywhere, use the Aquascape Smart Control App.
• A mounting holster is included
which provides a location to store
the remote control. The holster
includes an adhesive backing as
well as two screws for quick and
easy mounting (Ex. 6).
• Mount or store the remote in an
area that is protected from the
elements.
Troubleshooting
• Remote not controlling the receiver
– Ensure the receiver switch is set to the correct position
– Ensure remote battery is functioning
– Re-pair the remote to the receiver
• Unable to pair
– Try a new battery in the remote
– Make sure you perform the pairing procedure within one minute of
supplying power to the receiver
Ex. 4
Decrease Flow
Increase Flow
On/Off
Mounting Holster
Ex. 5
Mounting
Holster
Ex. 6