Frederick York Cabots Guide D'installation page 4

FRYCABHDWH
CAUTION: Do not place units inside a shower, sauna, steam room, or wherever unit
would be in direct contact with water.
1. Slide the electric wires through the
silicone hose and then through the
right angle decorative tube.
4. Loosen only the wall brackets and
bracket cover from the towel warmer.
All manuals and user guides at all-guides.com
2. Use allen wrench to fasten the right
angle decorative tube and heating
element with set screws, and then
fasten the tube with bracket cover and
wall bracket B. Fix the mounting shelf
and mounting tubes with the towel
warmer. Use allen wrench to fasten the
bracket cover and wall bracket A to the
mounting shelf and tubes.
5. Locate the wall bracket in the mark
position and mark 6 screw points with
a pencil.
3. Place the towel warmer in desired
location. Check for level with the spirit
level. Mark the position of 5 brackets
with a pencil.
6. Drill holes in the wall.