Publicité
Les langues disponibles
Les langues disponibles
Indicator
1-Low battery symbol
2-MAX or MIN Symbols
3-%RH symbol
4-Humidity value
5-°C/°F symbol
6-Auto power off symbol
7-Temperature symbol
Function
Power
Press the power button to turn power on or off.
Humidity and air Temperature Measurements
• Hold the probe in the area to be tested & allow adequate time for readings to
stabilize.
• Press °C/°F switch to enter selector °F or °C measurement.
• Read the Relative Humidity and Air Temperature.
NOTE: Do not immerse the probe in liquid, it is intended for use in air on.
Minimum (MIN) Maximum (MAX) Function
The MIN/MAX mode allows the user to view only the lowest (MIN) or highest (MAX)
readings.
• Press the MIN/MAX button once and "MAX" appears on the display. The LCD is
now displaying the maximum
• reading of the selected parameter in the display. The display will not change until a
higher reading is registered.
• Press the MIN/MAX button again and "MIN" appears on the display. The LCD is
now displaying the minimum
• reading of the selected parameter in the display. The display will not change until a
lower reading is registered.
• Press the MIN/MAX button for 3 seconds to exit the MIN/MAX mode, and the
"MAX" or "MIN" icon will disappear.
Note: While powering on the meter per time, it restarts recording Minimum and
Maximum and the recordings
don't stop until the meter is turned off.
www.grupotemper.com
All manuals and user guides at all-guides.com
Battery Replacement
If the sign "
replaced. Open the battery
case and replace the exhausted battery with new battery. (1 x 9V battery NEDA 1604,
6F22 or equivalent)
Mini Temperature & Humidity Meter
" appears on the LCD display, it indicates that the battery should be
KTD-01 MINI
2
Publicité
