Publicité
Les langues disponibles
Les langues disponibles
6. Serial Cable Connection
To allow for unattended system shutdown for your operating system,
connect the serial cable as per diagram below.
7. Turn On/Off
To turn on the UPS unit, press the power switch lightly. To turn off the
UPS unit, press the power switch again (When Switch ON，The LED is
illuminated.).
8. LCD Display Specification
The LED should always turn on when UPS is properly functioning,
including when the UPS is in the "off charging mode" and "fault mode."
When the LCD functions, it will display the following information (see page
9).
All manuals and user guides at all-guides.com
8
Publicité
