Publicité
Les langues disponibles
Les langues disponibles
iKeypad®
operations instruction
1 - Drill a hole for the cable
Drill a hole at appropriate position to make space for the cable to connect to the power source.
2 - Install the mounting plate
Fix the mounting plate with 4 screws.
3 - Install the hook
Fix the hook to the mounting plate with 2 screws.
4 - Install the access controller
Fit the access controller into the hook and fix it on the mounting plate with a screw in the bottom.
PAIR THE ACCESS CONTROLLER WITH APP:
1 - Tap the panel to light it up and activate the lock.
2 - On voice prompt" Please add Bluetooth Administrator", activate the APP.
3 - Tap the "
" icon on the upper left corner, tap "+ Add Lock", select "Door Lock"
4 - Tap the device shown on the screen. Wait a few seconds till the lock gives a voice prompt/long
beap, which means it is added successfully.
1
2
Notice: If fails, please shut off the APP and Bluetooth turn them on and try the above process
!
again.
LIMITED WARRANTY:
For any defect in material and workmanship, the original purchaser of the product:
1)Can return or ask for a replacement within 7 invoice days.
2)Can ask for a replacement within 15 invoice days.
3)Can ask for free repair in 365 invoice days.
This warranty does not cover defects caused by modification, alteration, misuse or physical abuse of
the product.
3
www.itec.com.pt
9
Publicité
