Publicité
Before first Use
Remove all parts of star projector from the packaging. Keep
packaging materials out of reach of children. There is a risk of
suffocation!
Inserting / replacing the Batteries
1. The battery compartment (7) is located at the rear of the device.
2. Push up the latch of the battery compartment lid and remove it.
3. Insert 3 new batteries of the type LR6 (AA) into the battery
compartment. Pay attention to the proper polarity of the batteries.
The polarity is printed inside the battery compartment.
4. Close the battery compartment with the lid.
Replace the batteries if the sound volume becomes lower or if the
projection light becomes darker.
Using an external Power Adaptor
Alternatively the star projector can be operated using an external
6 V
power adaptor (not included). To do so, connect it with the
socket (8). Pay attention to the proper polarity of the adaptor's
plug.
Remove the batteries from the star projector if you operate it
using an external power adaptor.
Star Projection
Press the light key (3) to switch on the star projection. The stars
are projected to the wall or ceiling in slowly alternating colours.
Press the light key again to switch off the star projection.
All manuals and user guides at all-guides.com
Using
8
Publicité
