Publicité
Routing and Connecting Your AV Cable
Fully extend the mount's swing arms and swivel
the TV left or right.
1)
Remove the end cap from the PowerMount's right swing
arm's cable management cover. Unscrew the cover on
the mount's second arm using a Phillips screwdriver.
2)
Route AV cable from your wall, set-top box, AV receiver
or other source through the right channel and second
arm, as shown.
3)
Slide the cable management cover back into place.
Screw on the second arm's cover. Replace the end cap.
Congratulations!
You've successfully installed your PerfectView
450L FlatScreen Mount.
Visit MonsterCable.com/FlatScreen for more innovative
Monster FlatScreen products, including our ultra
low-profi le FlatScreen Cables and our FlatScreen Clean
LCD and plasma cleaning solution for preserving your
fl atscreen display.
30
All manuals and user guides at all-guides.com
Publicité
