Publicité
6
Consejos de seguridad y uso:
7
Reciclado del producto:
MATERIAL
DEPOSITAR EN:
CONTENEDOR
PLÁSTICO
AMARILLO
CONTENEDOR
PAPEL Y
AZUL
CARTÓN
NOTA: El color de los contenedores puede variar en función del pais donde se aplique. Consulte la normativa local al respecto.
Instructions for use and safety
1
General view:
2
Normative: -Follow these instructions to comply with the R.D. 842/2002, directive 2014/35/UE (DBT) and EN 60670-1 &22.
- Installation, service and maintenance of the electrical equipment may be carried out by anauthorized person only.
3
General characteristics: Connection and derivation box with ventilation holes; For embedded installation in
brick walls; With frame and folding door for easy opening; The door has ventilation holes that allow the
internal temperature produced by active elements, home automation, etc. to dissipate. Wide interior space
to make all kinds of connections; Possibility of putting up to three DIN rails for fixing modular and home
automation elements; (Ref. GU6888); Possibility of placing up to three mounting plates (Ref. PL-MP28) at
the bottom, for fixing all kinds of elements (connection strips, shunts, power supplies, etc...); Possibility of
fixing connection strips in the upper and lower part for derivation of neutral, phase and earth (Ref. 212N,
212TT); Possibility of serving with metal key lock; Horizontally and vertically linkable; Ultra-fast locking
screw; Completely removable sides to facilitate the entry of multiple tubes (up to Ø 60 max.); Dimensions:
360 x 528 x 86mm (W x H x D); thermoplastic material. GWT 850°C; White color.
4
Components: 1.- Box.2.- Frame. 3.- Reversible door. 4.- Closure screws. 5.- Union boxes. 6.- Cornice claw
(BOL-COR5260/4). 7.- Metallic DIN profile (*accessory not included). 8.- Mounting plate (*accessory not
included). 9.- Connection strip (*accessory not included).
Assembly: 5-1 Box assembly. A- Follow the instructions (IM-BCOR5260) of the bag (BOL-COR5260/4).
5
B-Assemble the frame to the box with "4-closing screws"; C- Assemble door.
5-2 Link boxes. A- Place "6.- Union boxes" sliding them into the "accommodations for vertical union (a)" or
"horizontal (b)", as indicated in the diagram. Combine appropriately with the position of the claws, since they
are mounted in the same housings. B- Assemble the boxes as indicated in the previous point (5-1 Box
assembly).
5-3 Assembly "7.- Metallic DIN profile" (accessory not included). GU6888. - Assemble the Profiles (7) with
their 4 screws, in the 3 possible positions. Screw position. Position profiles.
5-4 Assembly "8.- Mounting plate" (accessory not included). Ref. PL-MP28. - Assemble the Plates (8) with
their 2 screws in the 3 possible positions. Screw position. Plates position.
5-5 Assembly "9.- Connection strip" (accessory not included). Ref. 212N, 212TT. A- Assemble the strip (9) in
its housing (a). B- Slide to the bottom. Rules position.
6
Safety and usage tips.
7
Product recycling: PACKAGING WASTE; MATERIAL; PLASTIC; PAPER AND PAPERBOARD; DEPOSIT IN: (NOTE); LOGO
IN SPAIN; INTERNATIONAL LOGO (NOTE); LOGO IN FRANCE; PRODUCT WASTE; WASTE; NO WEEE; DEPOSIT IN:
RESIDUOS DE ENVASE
LOGOTIPO EN
LOGOTIPO
ESPAÑA
INTERNACIONAL
RESIDUOS DE PRODUCTOS
LOGOTIPO EN
RESIDUOS
FRANCIA
NO RAEE
-4-
DEPOSITAR EN:
LOGOTIPO
ECOPARQUE
MUNICIPAL
ENGLISH
Publicité
