Memorex A Serie Manuel D'instructions page 24

All manuals and user guides at all-guides.com
TROUBLESHOOTING GUIDE
Check the following chart before requesting service.
SYMPTOM
POWER
The AC power cord is not connected.
No power.
Cassette is not inserted.
Although the power is on, the
TV/VCR does not operate.
TIMER REC button is depressed.
TV BROADCAST RECEPTION
TV station experiencing problems.
Picture control is not adjusted.
Possible local interference.
Poor or no picture.
Antenna (CATV) connector is not
connected or possible
localinterference.
TV station experiencing problems.
Picture control is not adjusted.
Possible local interference.
Poor or no color.
Antenna (CATV) connector is not
connected or possible local
interference.
TV station experiencing problems.
Antenna (CATV) connector is not
Picture wobbles or drifts.
connected or possible local
interference.
Cable TV channel is scrambled.
CATV connector is not connected.
TV/CATV Mode menu option is set to
No CATV reception.
the TV mode.
Cable TV service interrupted.
TV/CATV Mode menu option is not
No reception above
set to the appropriate mode.
channel 13.
UHF antenna is not connected.
TV station experiencing problems.
Antenna (CATV) connector is not
connected or possible local
interference.
Poor or no sound.
Possible local interference.
MUTING button is depressed.
TV station stopped broadcasting.
TV shuts off. Sleep timer is set.
OFF timer is set.
24
5A42201A E P20-Back
CAUSE
Try another channel.
Check picture control adjustments.
Check for source of reception
disturbance.
Check CATV connection or VHF/
UHF antenna, reposition or rotate
antenna.
Try another channel.
Check picture control adjustments.
Check for source of reception
disturbance.
Check CATV connection or VHF/
UHF antenna, reposition or rotate
antenna.
Try another channel.
Check CATV connection or VHF/
UHF antenna, reposition or rotate
antenna.
Try another channel.
Check all CATV connections.
Set the TV/CATV Menu option to
the CATV mode.
Contact your Cable TV company.
Make sure TV/CATV menu option is
in the appropriate mode.
Check UHF antenna.
Try another channel.
Check CATV connection or VHF/
UHF antenna, reposition or rotate
antenna.
Check for source of reception
disturbance.
Check that MUTING button has not
been pressed.
Tune new channel.
Set Sleep Timer to "0".
Cancel OFF timer.
24
POSSIBLE SOLUTION
Connect the AC power cord to the
AC outlet.
Insert a video cassette.
Press the TIMER REC button.
17/4/2002, 13:32
PAGE
5
19
21
13
18
26
10,11
13
18
26
10,11
13
10,11
13
11
15
11
15
10
13
10, 11
26
14
13
14
17