Coby DVD938 Guide De Démarrage Rapide page 2

Step 2: Connecting Your Television
For a basic video connection, use the composite video option shown
here. For additional connection options, please refer to the accompa-
nying instruction manual.
For a composite video connection:
Plug one end of the supplied composite video cable (yellow plug) into
the "Video Out" socket of the DVD938. Plug the other end into the
"Video In" socket of your TV.
After all connections have been made, plug the power cord of the DVD938
into an AC power outlet. For a complete guide to your connection options,
please refer to the accompanying Instruction Manual.
IN
All manuals and user guides at all-guides.com
AV 1
AV 1
Step 3: Set Up the Viewing Mode
1) Set the Power switch on the rear panel of the DVD938 to the
"ON" position, then press the Standby button to turn the unit on.
2) Turn on the TV.
3) Press the "Source" button on the TV's remote control repeatedly
until you see the DVD background screen. This is the correct
viewing mode for the DVD938.
For some TVs, you may need to press the "AV", "Select",
or "Mode" button to find the correct viewing mode. If you
are unable to find the correct viewing mode, check the con-
nections again or refer to your TV's instruction manual.
Press the "Source" button on your TV until
you see the DVD background screen.