HiTi Digital X610 Mode D'emploi page 9

Placing the cartridge into the printer
Please slide the circled parts in place, and place each Y/M/C/O cartridge in corresponding
slots.
Misplacing of ribbon will lead to a jam.
O
All manuals and user guides at all-guides.com
C
M
Y
5
HiTi X610 User Manual
When placing Y/M/C/O
cartridge to the printer, make
sure each of them meets the
correct position. When you are
done, close ribbon cassette
door.
After placing the ribbons,
please push the ribbon slots
back into the printer tightly,
then scroll the knob tight until
the indicator point on the knob
match the indicator point on
the printer. This should trigger
the printer initialization and
the LCD will show printer ready.
If failed to scroll the knob
correctly, error message will
appear.
Misplacing of ribbon will lead to
a jam.
English