Manuels Connexes pour Kalon Io Crib 011
Sommaire des Matières pour Kalon Io Crib 011
- Page 1 ASSEMBLY INSTRUCTIONS CRIB INSTRUCTIONS POUR LE MONTAGE DU LIT BEBE IO Model N : Io Crib 011 | KALON STUDIOS www.kalonstudios.com | studio@kalonstudios.com P.O. Box 421462 | Los Angeles | CA 90042 | 866.514.2034...
- Page 3 ENTIRELY ORIGINAL DESIGN FOR A SUSTAINABLE CULTURE Made with uncompromising craftsmanship by traditional woodworkers in Germany from 100% sustainably-harvested, solid, european hardwood, the Io Collection is a celebration of craft and contemporary woodworking. The unique character of the natural material is an integral part of the design that will only improve with age and use.
- Page 4 MAINTENANCE, CLEANING AND STORAGE Please take care to periodically check the crib/toddler bed to ensure that it is properly assembled and that no parts have come loose. Verify that the crib/toddler bed parts remain snuggly fit against one another and tighten hardware if needed. Clean with a rag dampened with warm water.
- Page 5 PIECES INCLUDED / PIECES INCLUSES Refer to pouch for true to life diagram of hardware. Mattress Support ( x1 ) Support de matelas ( x1) Side Panel ( x2 ) Panneau latéral ( x2 ) Conversion Side Rail ( x1 ) Panneau de Conversion ( x1) Side Panel Foot ( x2 ) Panneau inférieur latéral ( x2 )
- Page 6 DETAIL / DÉTAIL 1 DETAIL / DÉTAIL 2 DETAIL / DÉTAIL 3...
- Page 7 STEP 1 • Fully thread parts B into holes along bottom edge of the Side and End Panels. (Detail 1) • Troubleshooting: Sometimes screw inserts can be blocked by small amounts of glue. If you encounter any obstruction when inserting hardware, thread the bolt in and out several times to clear the blockage.
- Page 9 STEP 2 • Fully thread parts B into holes along inner face of the End Panels and End Panel Feet. • Once fully screwed in, ensure that the through hole in part B aligns with holes on the inner face of the assembled Side Panels. Part B may need to be slightly backed out for true alignment.
- Page 11 STEP 4 adjusting mattress height • Select the approprate height for the mattress support. • Align holes on mattress support with those on the inner face of the Side Panels. Insert parts J through holes. • Use a philips head screwdriver to tighten parts J. ÉTAPÉ...
- Page 12 Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. Contact Kalon Studios for replacement parts and instructional literature if needed. DO NOT substitute parts. • If refinishing, use a non-toxic finish specified for children’s products.
- Page 13 CAUTION: Any mattress used in this crib shall be at least 69cm by 131cm with a thickness not exceeding 15cm.
- Page 14 STEP 3 • Insert parts A2 into large holes along inner face of Side Panels and Side Panel Feet ensuring that A2 is centered and that the holes align horizonally. • Join the assembled Side and End Panels by sliding Parts B through holes along outer edge of Side Panels and into holes in parts A2.
- Page 16 STEP 1 • Fully thread parts B into holes along bottom edge of the Side and End Panels. (Detail 1) • Once fully screwed in, ensure that the through hole in part B aligns with holes on inner face of Side and End Panel Feet. Part B may need to be slightly backed out for true alignment. •...
- Page 17 DETAIL 1 / DÉTAIL 1 DETAIL / DÉTAIL 2 DETAIL / DÉTAIL 3...
- Page 18 PIECES INCLUDED / PIECES INCLUSES Refer to pouch for true to life diagram of hardware. Side Panel ( x2 ) Panneau latéral ( x2 ) Side Panel Foot ( x2 ) Panneau inférieur latéral ( x2 ) End Panel ( x2 ) Panneau d’extrémité...
- Page 19 NOTES • For maintenance, cleaning and storage information, please refer to the Io Crib Assembly Instructions. • According to CPSC regulations Toddler Beds are not intended for use for children younger than 15 months or more than 50lbs. • Not to be used as toddler bed beyond the 50lbs limit. • Intended for use with full-size crib mattress having minimum dimensions of 51 5 8 in.
- Page 20 KIT ASSEMBLY INSTRUCTIONS INSTRUCTIONS POUR LE MONTAGE DU LIT D’ENFANT IO Model N o Io Toddler Bed 013 & Io Conversion Kit 012 | KALON STUDIOS www.kalonstudios.com | studio@kalonstudios.com P.O. Box 421462 | Los Angeles | CA 90042 | 866.514.2034...