Télécharger Imprimer la page

La Crosse Technology LTV-WL1 Mode D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

SENSOR ID
La Crosse View™ Compatible:
There is a Device ID and bar code located under the front cover. This ID is recognized by the La Crosse
View app for users with an existing La Crosse View compatible system*.
To add this sensor to your existing La Crosse View™ compatible system:
1. Open your La Crosse View™ app to add sensors.
2. From Main Menu - select "Devices" under "Add/Edit"
3. On Devices page - select "ADD DEVICE"
4. Scan Device ID - Scan the bar code on your sensor or press inside the Device ID search box to enter
your code manually. Once entered, select "Search".
5. On Confirm Device page - Confirm the sensor image and model number are correct and select "YES".
6. On Enter Device and Location Names page - Enter Device Name and select a location or enter
a Location Name for your sensor. Select "DONE".
7. You will now be prompted to add a water alert. Select "Add Alert" to add the alert right away or select
"Later" to add at a later
*Note: This sensor cannot connect to the La Crosse View app without a La Crosse View compatible
station. Station's that are La Crosse View compatible have built-in Wi-Fi capabilities that send your
sensor's data to the La Crosse View app. For more information about our new connected stations visit:
http://bit.ly/LaCrosseViewconnected
CAR E + M AI NT E NANCE
• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use,
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries have with correct polarity (+ / -).
• Remove batteries from equipment that will not to be used for an extended period.
• Promptly remove expired batteries.
SPECIFICATIONS
Temperature Range: -40°C to 60°C (-40°F to 140°F)
Transmission Range: Up to 400 feet (121 meters) in open air, RF 915 MHz
Update Intervals: Samples every minute. Updates immediately if change.
Updates every 3 minutes if no change.
LED Lights: Blue-Normal transmission-No water detected
Red- Water detected-flashes twice every 5 seconds
Purple-Low battery-flashes 5 times every 30 seconds
Batteries: 2-AA, IEC, LR6 batteries (not included)
Battery Life: over 24 months with reputable batteries
Page | 3

Publicité

loading