Publicité
Les langues disponibles
Les langues disponibles
EN
Configuring the gateway
2
1. Open a browser window on your PC, smartphone or
tablet.
2. In the address line, you must now enter the IP address of the
gateway in the factory set state http://192.168.0.211, then press
the Return button.
3. In the log-in window, you enter admin as the user name
and admin as the password.
Note: If no page appears after you enter the IP address, this
might be because the gateway is in a different IP address area.
For information on how to proceed in this case, please consult
the gateway start-up manual, section "Changing the network
parameters for gateway access".
Network configuration
3
You are now on the starting page of the gateway web interface. Click
on "Network configuration" in order to adapt the network settings to
your home network.
All manuals and user guides at all-guides.com
Publicité
