Denver Electronics MPG-1013 PLL Guide De Démarrage Rapide page 12

PRECAUTIONS AND MAINTENANCE
TAKING PRECAUTIONS
Before powering of the player, please plug in the earphone to avoid damaging the earphone as well as
maintenance of the player. Turn off the player when stop using it.
Do not place it near heat resource or subject to direct sunlight, dust, humid or rain.
Do not use it in extra-dry environment to avoid electrostatics.
The MP3 player only accepts the standard USB 2.0 output voltage and current to charge the built-in Li-Ion
battery: 5-Volt voltage and less than 500mA current. If the charging voltage and current are out of the
compass, it will damage the battery and the MP3 player. It will be no warranty in this case. Please make sure
the output voltage and current of the USB port on your PC or USB adapter before charging this player. If you
found the screen is blinking during using the USB wall adapter, please use the PC USB port to charge the
player instead of USB wall adapter.
CLEANING THE DEVICE
Before cleaning the device make sure it is turned off.
To clean the LCD screen or plastic casing, wipe it with a soft, slightly dampened cloth. Never use any alcohol
or diluted detergent to clean the device.
Never spray or pour liquid directly onto the screen or plastic casing.
9