Motion CM-11 Mode D'emploi page 11

All manuals and user guides at all-guides.com
Shortly press the program button on the motor. The
4.1
blind will start stepping, indicating that program mode
has been activated. (The blind keeps stepping until
program mode is deactivated.)
Press the pair button on the back of the remote control
4.2
to pair the blind with the remote control.
The blind will shortly stop stepping, indicating that the
remote has been paired with the blind.
Repeat steps 4.1 - 4.3 to remove a blind from a
channel.
4. PAIR A REMOTE
Pair
button
11