CARQON Toddler seat Mode D'emploi page 2

Tools
required
• M5 Allen key
• Phillips screwdriver
MOUNTING KIT CONTENTS:
Buckle 1x
Phillips head screw 2x
STEP 1
• Remove the bench from the box and place it upside down.
• Place the buckle next to the seat belt mounting point on
the bench.
STEP 2
•
Screw the buckle directly onto the bench
without drilling holes.
•
Place the bench back into the box.
STEP 3
• Disassemble the belt mounting plate in the box and place the toddler seat in the box.
All manuals and user guides at all-guides.com
Small washer 1x Belt
Large washer 1x M5 long bolt
1x
1x