Packard Bell 170 SW Manuel De L'utilisateur page 21

1. Connect the A/V out jacks on a VCR or DVD to A/V-IN jacks on the TV.
2. Use the TV/PC button to select VIDEO mode.
3. Press the PLAY button on the VCR or DVD.
The VCR or DVD playback picture appears on the TV screen.
Note :
If you have a mono VCR, connect the audio cable from the VCR to the L (mono) A/V-IN socket of the set.
If using an S-VIDEO source, the picture
quality will be improved over a video source.
1. Connect the S-VIDEO output of a VCR or
DVD to the S-VIDEO input on the TV.
2. Connect the audio cables from the VCR or
DVD to the L (MONO) R inputs on the TV.
3. Select S-VIDEO mode by pressing the
TV/AV button repeatedly.
4. Press the PLAY button on the VCR or DVD.
The VCR or DVD playback picture appears on
the screen.
Insert the headphone plug to the headphone jack on the TV. You can listen to the sound through
the headphones with no sound from the speaker on the TV. To adjust the headphone volume, use
the headphone Volume menu in the Sound menu.
1. Connect the A/V-in jacks on an amplified subwoofer or amplifier to the Subwoofer-OUT jack on
the TV.
To adjust the subwoofer volume, use the Subwoofer Volume menu in the Sound menu.
* Not available on 170 SW model.
** Not available on 230 SW or 300 SW model.
All manuals and user guides at all-guides.com
A/V INPUT**
S-VIDEO
INPUT
H
EADPHONE JACK
S
UBWOOFER OUTPUT
VCR/DVD
*
21