Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
FLOOR LAMP
Save these instructions
IMPORTANT SAFETY INSTRUCTIONS:
•
These instructions are provided for your safety.
Please read carefully and completely before beginning
the assembly and installation of this lighting fixture.
•
This lighting fixture is intended for indoor use only.
•
Always place lighting fixture on a solid, level surface.
To avoid the risk of fire, do not exceed the maximum wattage of 100W TYPE A lamp
•
or 23W Self-Ballasted lamp
(Light bulb not included)
•
This lighting fixture has a polarized plug (one prong is wider than the other) as a safety
feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Never use with an extension cord unless plug can be fully inserted.
Do not alter the plug. Do not attempt to bypass this safety feature.
WARNINGS:
•
To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug this
lighting fixture and allow it to cool before attempting to replace the light bulb.
•
Do not touch light bulb while fixture is turned on.
•
Keep flammable materials away from this lighting fixture.
•
Never look directly at a lit bulb.
CARE INSTRUCTIONS:
•
Unplug lamp before cleaning.
•
Wipe clean with a soft, dry cloth or static duster.
•
Always avoid the use of harsh chemicals or abrasive cleaners as they may
cause damage to the fixture's finish
Made in China
, or 9W SB LED
lamp or lamp adapter.
Page 1 of 9
,
FL0179 rev031419EFS
Publicité
Sommaire des Matières pour Hudson & Canal FL0179
- Page 1 , or 9W SB LED lamp or lamp adapter. (Light bulb not included) • This lighting fixture has a polarized plug (one prong is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug. Do not attempt to bypass this safety feature. WARNINGS: • To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug this lighting fixture and allow it to cool before attempting to replace the light bulb. • Do not touch light bulb while fixture is turned on. • Keep flammable materials away from this lighting fixture. • Never look directly at a lit bulb. CARE INSTRUCTIONS: • Unplug lamp before cleaning. • Wipe clean with a soft, dry cloth or static duster. • Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish Made in China Page 1 of 9 FL0179 rev031419EFS...
- Page 2 PRE-ASSEMBLY: Carefully remove all parts and hardware from carton, along with any protective plastic packaging. Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware. SEE NEXT PAGE FOR PROPER ASSEMBLY PROCEDURE. BE VERY CAREFUL NOT TO STRIP THREADS. PARTS INCLUDED: (A) Lamp Shade (B) Top Post (C) Center Post (D) Bottom Post (E) Screws (2) (F) Tool (G) On/Off Control...
- Page 3 STEP 1: Begin at the top by attaching Top Post (B) to the Lamp Shade (A), taking extra care not to strip the threads. Tighten firmly by hand. STEP 2: Attach the Center Post (C), taking extra care not to strip the threads. Attach the Bottom Post (D), taking extra care not to strip the threads. Carefully pull the power cord out from the Base (H) to remove slack. STEP 3: Insert Bottom Post (D) into the Base (H) as shown and secure using two Screws (E). Tighten firmly using Screwdriver Tool (F). Made in China Page 3 of 9...
- Page 4 LAMPADAIRE Conservez ces instructions CONSIGNES DE SÉCURITÉ ESSENTIELLES : • Ces consignes sont fournies aux fins de votre sécurité. Veuillez les lire attentivement et au complet avant de commencer l’assemblage et la mise en place de ce luminaire. • Ce luminaire est destiné à utilisation à l’intérieur seulement. • Posez toujours ce luminaire sur une surface solide et de niveau. • Pour éliminer tout risque d’incendie, évitez de dépasser la puissance maximale prescrite d’une ampoule TYPE A de 100 W , ou d’une ampoule à lumière mixte de 23 W , ou d’une ampoule à...
- Page 5 PRÉASSEMBLAGE : Retirez soigneusement de la boîte toutes les pièces, toute la quincaillerie, et tout emballage de plastique protecteur. Ne mettez aucun élément de contenu au rebut avant de terminer l’assemblage au complet, afin d’éviter de jeter accidentellement de petites pièces ou un élément de quincaillerie. VOIR PAGE SUIVANTE POUR LA PROCÉDURE DE MONTAGE APPROPRIÉE. VEILLEZ À...
- Page 6 ÉTAPE 1 : Commencez par le haut en fixant le poste-lampe supérieur (B) à l’abat-jour (A), en prenant grand soin d’éviter d’arracher les filets. Serrez fermement à la main. ÉTAPE 2 : Vissez le premier poste-lampe central (C) en place, en prenant grand soin d’éviter d’arracher les filets. Vissez le deuxième poste-lampe inférieur (D) en place, en prenant grand soin d’éviter d’arracher les filets. Tirez soigneusement le cordon d’alimentation hors du base de lampe (H) afin enlever le mou dans le cordon. ÉTAPE 3 : Insérez le poste-lampe inférieur (D) dans la base (H) comme indiqué et fixez-le à l’aide de deux vis (E). Serrer fermement à l’aide du tournevis (F). Fabriqué en Chine Page 6 de 9...
- Page 7 LÁMPARA DE PISO Guarde estas instrucciones INSTRUCCIONES IMPORTANTES DE SEGURIDAD: • Estas instrucciones se proporcionan para su seguridad. Léalas cuidadosamente y por completo antes de comenzar a ensamblar e instalar esta lámpara. • Esta lámpara está destinada a ser utilizada solo en interiores. • Coloque siempre la lámpara sobre una base firme y nivelada. Para evitar el riesgo de incendios, no exceda el vataje máximo de una bombilla de • 100W TIPO A , de 23W con balasto incorporado , LED SB de 9W , o un adaptador para bombilla. (Bombilla no incluida) •...
- Page 8 ANTES DEL ENSAMBLADO: Retire con cuidado todas las piezas y herramientas de la caja, junto con todo el envoltorio plástico protector. No deseche nada hasta después de haber terminado de ensamblar para evitar botar por accidente piezas pequeñas o herramientas. VEA LA PÁGINA SIGUIENTE PARA EL PROCEDIMIENTO DE MONTAJE ADECUADO. TENGA ESPECIAL CUIDADO DE NO DESGARRAR LOS HILOS. PARTES INCLUIDAS : (A) Pantalla de lámpara (B) Poste superior...
- Page 9 PASO 1: Comience en la parte superior uniendo el poste superior (B) a la pantalla de la lám- para (A), poniendo especial cuidado en no desgarrar los hilos. Ajuste a mano con firmeza. PASO 2: Fije el poste central (C), poniendo especial cuidado en no desgarrar los hilos. Fije el poste inferior (D), poniendo especial cuidado en no desgarrar los hilos. Extraiga con cuidado el cable eléctrico de la base (H) para eliminar la holgura. PASO 3: Inserte el poste inferior (D) en la base (H) como se muestra y asegúrelo con dos tornillos (E). Apriete firmemente con la herramienta destornillador (F). Hecho en China Página 9 de 9...