Publicité
MAINTENANCE
WARNING:
In order to avoid personal injury and the risk of fire and electric shock, remove the battery pack
before adjusting, inspecting, or cleaning the blower.
CLEANING
Remove the battery pack.
➢ Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep the air vents
free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the air vents in water.
➢ Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong solvents or
detergents on the plastic housing or plastic components. Certain household cleaners may cause damage,
and may cause a shock hazard.
BATTERY PACK
➢ Store the battery pack fully charged.
➢ Once the charging light turns green, remove the battery from the charger and disconnect the charger
from the outlet.
➢ Do not store the battery pack on the tool.
➢ After charging, the battery pack may be stored in the charger, as long as the charger is not plugged in.
CHARGER MAINTENANCE
➢ Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed cavity
or onto the contacts. Wipe the charger clean with a dry cloth. Do not use solvents or water, and do not
place the charger in wet conditions.
➢ Unplug the charger when there is no battery pack in it.
➢ Fully charge the batteries before placing them in storage.
➢ Store the charger at normal room temperature. Do not store it in excessive heat. Do not use the charger
in direct sunlight. Recharge at room temperature between 45˚F and 104˚F. If the battery pack is hot,
allow it to cool down before recharging.
All manuals and user guides at all-guides.com
11
Publicité
