Publicité
Les langues disponibles
Les langues disponibles
For U.K. users only :
ADDITIONAL INFORMATION AND INSTRUCTIONS
WIRING INSTRUCTIONS
WARNING : ALL APPLIANCES MUST BE EARTHED.
IMPORTANT : the wires in this lead are coloured in
accordance with the following codes.
Green and Yellow : Earth
Blue
: Neutral
Brown
: Live
Connect the Green/Yellow
wire to the terminal in the
plug marked "E" (or by the
earth symbol) or coloured
Green and Yellow.
Connect the Brown wire to
the terminal in the plug
marked "L" or coloured Red.
Connect the Blue wire to the terminal in the plug
marked "N" or coloured Black.
Seek professional advice if you are unsure of the
correct procedure for the above.
ABOUT YOUR FACTORY FITTED PLUG
The cord is already fitted with a plug incorporating an
appropriate fuse. If the plug does not fit your socket
outlet, see paragraph below. Should you need to
replace the fuse in the plug supplied, an appropriately
rated approved BS 1362 fuse must be used (refer to
electrical specification for fuse rating).
If the plug supplied does not fit your socket outlet, it
should be removed from the mains lead and disposed
of safely. The flexible cord insulation should be
stripped back as appropriate and a suitable
alternative plug fitted. The replacement plug must be
equipped with an appropriate fuse. If the plug has
external access to the fuse (non-rewirable type plug)
please note that the fuse cover is an important part
of the plug. Please ensure that it is always refitted
correctly. If you lose this cover, please do not use the
plug. You may contact Tefal U.K. Limited for a
replacement.
All manuals and user guides at all-guides.com
N: Blue
E: Green and
or black
yellow or green
L: Brown
or red
Fit correct
fuse(13 amp)
Use cable
gripper
Publicité
