Hama M2120 Mode D'emploi page 6

All manuals and user guides at all-guides.com
The following information appears on your screen when
installation is completed successfully
3. Battery Indicator Display
The control light starts to fl ash when the battery voltage
is too low. Although the mouse will still function for
some time, you should change the batteries as soon as
possible.
Note:
When you turn on the mouse or insert new batteries, the
battery indicator display lights up briefl y.
Fig.2
DPI-Switch
Battery Indicator
Display
4. DPI Switch
Use the DPI switch to toggle the mouse's sensitivity
between 500 and 1000 DPI. (Fig. 2)
5. Functionality Problems
If the mouse does not function as expected, ensure that you
have carried out the following steps:
1. The batteries are new and have been inserted
correctly
2. The Bluetooth device was installed successfully.
3. Receiver and devices are within their communication
range (depending on location, max. 10 m)
See www.hama.com for the declaration of
conformity with R&TTE Directive 99/5/EC.
6. Functionality Problems
If the mouse does not function as expected, ensure that you
have carefully carried out the following steps.
• The battery was charged (green LED).
• The Bluetooth device was successfully installed.
• The receiver and devices are within their communication
range.
(depending on local conditions max. 10 m)
Additional notes:
We suggest removing the mouse from the PC card slot if the
laptop is to remain switched off for a long period of time.
Do not use the M2120 on metal surfaces when possible.
Metals such as iron, aluminium, or copper block the
Bluetooth transmission and could increase or fully interrupt
the reaction time of the mouse for a short time.
As soon as the laptop goes in to idle mode, the M2120 does
the same. Reactivate the connection by pressing the right
or left mouse button.
5