connecting the boombox to an auxiliary source
MP3 player
Cable
Smartphone
Jack/jack 3.5 mm
The PC/AUX IN plug enables you to connect an audio player, and play music from the player on the two
radio speakers.
To do so, plug the end of a 3.5 mm jack/jack cable (not supplied) into the PC/ AUX IN jack on the back
1.
of the radio.
Plug the other end into the audio output jack of your media player. Refer to your audio player's user
2.
guide for more information about the location of this jack.
Press STAND BY/FUNC. to select the AUX function.
3.
Begin playback on your auxiliary source; the sound travels through the radio's speakers.
4.
Note: control the playback, pause and change tracks on the auxiliary source.
26
All manuals and user guides at all-guides.com
maintenance and cleaning
Cleaning the device
Always unplug the radio from the mains socket before cleaning.
1.
Clean the device only with a soft, dry cloth.
2.
Do not use liquid cleaners or aerosol cleaners.
3.
Notes on the discs
DISK HANDLING
CLEANING THE DISCS
STORING THE DISCS
Store the disc in its case after use.
Do not expose the discs to very cold, humid or hot environments.
Never leave it in a parked vehicle in direct sunlight.
DISCS THAT ARE DAMAGED AND OUT OF SHAPE
Hold the disc by the ends and make sure that your fingers do not touch
the playing surface. Do not glue paper or put stickers on the discs.
Fingerprints and dust on a disc can cause poor quality sound
and sound distortion. Before playing, clean the disc with a
clean, dry cloth from the centre to the ends.
Never use alcohol, benzene, thinner, cleaning fluid or other
chemicals.
Do not use compressed air to clean dust.
Do not use cracked, chipped, warped, or otherwise damaged discs as they
may damage the player.
This radio is designed to be used only with traditional, fully circular discs.
Do not use discs of any other shape.
Never lift or move the appliance during playback: discs rotate at high speed
and may be damaged.
27