GMC GG36GT Mode D'emploi page 9

F Compressor Pro
Troubleshooting
Problem
No function when On/Off Trigger Switch (4) is operated
Battery will not charge
Blade not cutting thoroughly
All manuals and user guides at all-guides.com
Possible cause
No power
Defective On/Off Trigger Switch
Charger not fully inserted
Ambient temperature in excess of operating parameters
Dry blades
Low battery charge
Worn blades
9
Solution
Check power supply
Replace the On/Off Trigger Switch at an authorised GMC
service centre
Check the charger is properly connected to the Charging
Port (5), and check the mains is providing power
4.5°C and 40°C Ensure surrounding air temperature is between
Lubricate the blades with a suitable spray lubricant
Recharge battery
Replace blades at an authorised GMC service centre
GB