Publicité
Les langues disponibles
Les langues disponibles
• For best air circulation, make sure that the Ionizer is at least 1 ft. away from wall or any
large objects.
• Place the unit on a desk, table or shelf.
• Before connecting the unit, make sure that the Collection Grid is inserted properly.
• Press on the Tab with thumb to open and pull out the Collection Grid starting at the top.
• To insert the Grid back in, first, slide down the bottom part of Collection Grid into the
ionizer. Then, push in the top of the Collection Grid to lock it in place.
• KEEP FINGERS AWAY FROM THE SHARP SURFACES.
• Insert the power cord into the back of the unit first, then plug the adapter (included) into
the electric outlet.
• Turn the Switch to Whisper or Turbo position. Whisper Operation operates using negative
ions that pull in polluted air, trap GRID contaminants, and release clean, healthy air.
Turbo Operation
Verwenden Sie diesen Modus, um starke Gerüche in kurzer Zeit zu eliminieren. Er verwen-
det die gleiche Technik wie der Flüstermodus, ergänzt um einen Ventilator, der die Luftzir-
kulation erhöht und den Luftreiniger noch wirkungsvoller macht.
Note: After extended use of the Ionizer, it's Collection Grid needs to be cleaned. Clean it
at least once a month, or more often depending on the area where the unit is placed.
1. Make sure to unplug the unit from electrical outlet.
2. Remove the Collection Grid out, press on the Tab with thumb to open and pull out the
Grid starting at the top.
3. Using the damp cloth, wipe the dust off. Keep fingers away from the sharp surfaces.
4. Do not use any cleaning solution to wet the cloth, use WATER ONLY. Make sure that the
Collection Grid is not wet before inserting it back in. Wipe dry if there is any water remai-
ning on the grid, or just air dry until it is completely dry.
5. Place the Collection Grid back inside the unit. To insert the Grid back in, first, slide down
the bottom part of Collection Grid into the ionizer. Then, push in the top of the Collection
Grid to lock it in place.
6. Plug the Ionizer back into the electrical outlet. Turn the unit on by moving the dial from
the OFF position to Whisper or Turbo positions.
8
All manuals and user guides at all-guides.com
Use and Operation
Cleaning and Care
Publicité
