Publicité
Les langues disponibles
Les langues disponibles
MIRROR INSTALLATION INSTRUCTIONS
1. Measure the distance between the holes in the
mounting hangers (G) on the back of the mirror (F).
2. Measure and mark location for mounting hardware on
the wall using the measurement from Step 1. Make
sure the marks are level and located at the desired
height.
Note: Make sure to allow height clearance along the
bottom of the mirror for your faucet if necessary.
3. If the wall is drywall, there is no need to drill pilot holes
for wall anchors (BB). Screw anchors (BB) flush into the
wall. Then, insert screws (CC) into anchors (BB), leaving
approximately 1/4 in. protruding out from the wall.
If the wall is not drywall, please choose appropriate
mounting hardware (not included) for your installation site,
and follow the installation instructions to secure the
mounting hardware to the wall.
Hardware Used
BB
Anchor
CC
Screw
4. With the assistance of another adult, lift mirror (F)
to the wall and hang mounting hangers (G) on screws
(CC).
All manuals and user guides at all-guides.com
x 2
x 2
7
1
G
G
F
2
3
BB
BB
CC
CC
BB
4
G
F
CC
1/4 in.
CC
Publicité
