Demco Bouncyband SDMDBK Directives D'assemblage

#SDMDBK FRAME SENSORY DEN ASSEMBLY INSTRUCTIONS
Tent Assembly Pieces
*
Lay out the pieces on the floor before beginning to assemble. Put all pieces of each
size together. Be careful not to mix up the poles A" & C" as they are very close in size.
A
18.5"
B
14.5"
C
17.75"
D
13"
- Assemble bottom frame using
Step 1
90 angles. Be sure poles are fully inserted and pushed
all the way into the joints.
B
90˚
E
A
- Assemble sides and insert into
Step 3
bottom frame with the bottom of
the frame inside the tent fabric.
C
C
90˚
- Assemble roof pitches and attach
Step 5
to roof sides using the 135˚ angles.
Attach angles at top with 90˚ angles.
D
E
D
90˚
135˚
135˚
D
135˚
A x 4pcs
B x 15pcs
C x 8pcs
D x 8pcs
E
A
90˚
90˚
E
90˚
B
E
C
90˚
90˚
90˚
- Assemble roof ridge and
Step 6
attach to top of roof pitches using
the 90˚ angles.
E
90˚
D
90˚
135˚
E
90 angle x 6pcs
- Place assembled bottom frame into the tent.
Step 2
Build frame inside fabric tent. Make sure that the door flap
is on the narrow side of the frame. The material should
cover the floor.
Front Door Flap
- Assemble roof sides and
Step 4
attach to side tubes using
135 angles.
135˚
F
C
B 90˚
Find Bounceyband Indoor Sensory Den @demco.com,
search indoor sensory den
Call 800.962.4463 or email custserv@demco.com
F
135 angle x 4pcs
180 x 20pcs
Tent Fabric x 1pc
F
135˚
B
135˚
B
F
- Use internal ties to attach tent
Step 7
to frame.
135˚
F