Publicité
Les langues disponibles
Les langues disponibles
Part 4. Installing Instrucion:
Ols and Materials:wire of AWG3/30mm2 or thicker (black and red), wire cutter, M5 screw
driver,insulating tape.(these tools and materials should be prepared by user).
1.
According to the distance between inverter and battery pack, to prepare the length of
the wire, and each terminal copper should be 11-14mm,see below:
2.
Insert the black wire to blue clamp,red wire to red clamp,and fasten screws tightly, see
below:
3.
Please fix the battery pack with glue or belt firmly,the distance between battery pack
and inverter should be less than 75cm.
4.
Make sure inverter is power off and to lock the BLACK wire to inverter's NEGATIVE
pole tightly, and then lock the other terminal to battery's NEGATIVE pole tightly too.
Please use insulating tape to protect exposed wire copper.
All manuals and user guides at all-guides.com
11 -14 mm
Publicité
