Sera M-1039 Instructions

HARDWIRE INSTRUCTIONS
Warning: Manufacturer's warranty shall be void if product is not installed by a licensed professional.
Prior to commencing installation, please ensure the following:
- the wall where the product is being installed is able to support the weight of the product
- the main electrical supply has been powered off to complete installation
• Green= GROUND wire. connect to the ground wire in your box, or to the box as a ground.
• White= LIVE wire. connect to the White LIVE wire in your box.
• Black= Neutral wire. connect to the Black Neutral wire in your box.
Livew如
Neut,ruwi<e
Gmundwi«
( 1 ) You would see there three wires with three colors--white, green and black.
( 2 ) Safely connect these three wires one by one to the wires of wall switch in your home.
You can connect the wl<es that a,e coming out of the cente, of the back of the
ml"o'dl<ectly to you, elect,lcal connection bo,
Main Su p ply
Bath led mirror instructions
Power Cable From the Mirror
WALL MOUNTING INSTRUCTIONS
bluetooth speaker
anti fog
40W
Measure the distance of the mounting hole,
Drill holes with a suitable sized drill.
Connet the mirror wires with your main wires and
hang the mounting hole to the screw on the wall.
After care
Never use bleach based or window cleaning solution as these may damage the backing of the mirror.
We recommend a damp cloth to remove splashes.
MR24LED971
Insert the anchor and mounting screw into the
wall.
Peel off protective film and clean the mirror with
damp cloth.