Publicité
Mini PCIe Card: How to Install the Mini PCIe Card
A
如何安裝 Mini PCIe / So installieren Sie die Mini PCIe / Comment installer le Mini PCIe / Come installare l'unità Mini PCIe / Cómo instalar el disco de estado sólido Mini PCIe /
Установка твердотельного диска Mini PCIe / Como Instalar o Mini PCIe / Mini PCIe를 설치하는 방법 / Mini PCIe の取り付け方法
1. Locate the Mini PCIe slot on the motherboard. 2. Carefully insert the Mini PCIe Card into
the slot.
M.2 WiFi Module: How to Install the M.2 WiFi Module
B
如何拆下M.2無線模組 / So entfernen Sie das M.2-Modul / Comment retirer le module M.2 / Come rimuovere il modulo M.2 / Cómo quitar el módulo M.2 / Извлечение M.2 модуля /
Como Remover o Módulo M.2 / M.2 모듈을 제거하는 방법/ M.2モジュールの取り外し方法
C
1. Locate the M.2 Slot(Key E) on the motherboard.
2. Tighten the screw to secure the WiFi
Insert the WiFi Module Card into the M.2 Slot
Module Card to the motherboard.
for WiFi + BT Module.
M.2 SSD (Type 2242 / 2280) : How to Install the M.2 SSD
C
如何安裝 M.2 / SSD So installieren Sie die M.2-SSD / Comment installer le SSD M.2 / Come installare l'unità SSD M.2 / Cómo instalar el disco de estado sólido M.2/
Установка твердотельного диска M.2 / Como Instalar o SSD M.2 / M.2 SSD를 설치하는 방법 / M.2 SSD の取り付け方法
CT32
1. Prepare a M.2_SSD module and the screw.
2. Depending on the PCB type and length
of your M.2_SSD module, find the
corresponding nut location to be used.
CT2
T32
CT33
4. Peel off the yellow protective film on the nut
5. Align and gently insert the M.2 SSD
module into the M.2 slot (Key M).
to be used. Hand tighten the standoff into
the desired nut location on the motherboard.
Please be aware that the M.2 SSD
module only fits in one orientation.
3. Tighten the screw to secure the Mini PCIe Card
to the motherboard.
3. Attach the SMA Wi-Fi Antenna Cables to the
WiFi Module.
8cm, Type 2280
CT33
4.2cm, Type 2242
CT32
CT33
3. Move the standoff based on the module type
and length.
(Supports type 2242/2280 M.2 for SATA only)
CT1
NUT2
NUT1
6. Tighten the screw with a screwdriver to secure
the module into place. Please do not overtighten
the screw as this might damage the module.
All manuals and user guides at all-guides.com
SIM Card for WiFi/3G/LTE
D
SO-DIMM Slots: How to Install the Memory Modules
E
如何安裝記憶體模組 / So installieren Sie die Speichermodule / Comment installer les modules de mémoire / Come installare i moduli di memoria / Cómo instalar los módulos de memoria /
Установка модулей памяти / Como Instalar os Módulos de Memória / 메모리 모듈/ メモリモジュール
1. Carefully insert the SO-DIMM memory modules
into the slot at a 30-degree angle.
2.5-inch Hard Drive: How to Install the Hard Drive
F
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro / Установка жесткого диска /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
2
1. Remove the four screws on the bottom case.
en li up and remove the bottom panel.
USB Power On Function:
USB 電源開啟功能/ USB-Einschaltfunktion / Fonction d'alimentation USB / Funzione di accensione USB / Función de alimentación USB / Функция включении питания через USB /
Função de Ligamento USB / USB 전원 켜기 기능/ USB 電源オン機能
2. Push down until the modules snap into place.
1
2. Attach the HDD to the bottom panel and
secure it using the four screws.
en connect the SATA cable to the HDD.
USB Power On Function allows system power on via USB keyboard/mouse.
To enable USB Power On Function:
1. Enter BIOS by pressing <F2> or <Del> during device startup.
2. Select "Advanced > ACPI Configuration" from the menu.
3. Set "USB Keyboard Power On" and " USB Mouse Power On" settings to "Enabled".
4. Press F10 to Save and Exit.
1
2
3.
en reinstall the bottom panel.
Publicité
