Westfalia Magic Pen 3 in 1 Mode D'emploi page 13

Before first Use
Remove the transport protection foil between the
button cells and the contacts.
Unscrew the top barrel counter clockwise.
1.
Remove the protection foil and re-tighten the ball
2.
pen.
Replacing the Batteries
Replace the batteries with new batteries of the same
1.
type when the light of the LED respectively the UV
light gets weaker or if it does not shine anymore.
Unscrew the top barrel.
2.
Insert three button cells of the type LR41 into the
3.
battery compartment. Pay attention to the proper
polarity of the button cells. The plus pole has to face
towards the tip of the pen.
Screw the barrels together. Always use button cells
4.
of the same type and dimensions.
Operation
Press and hold the push button (1) to
1.
switch on the LED light.
Press and hold the push button (2) to
2.
switch on the UV light. The UV light
All manuals and user guides at all-guides.com
Operation
–
+
13
1
2
is