Publicité
Les langues disponibles
Les langues disponibles
line in Mode
The i-Station25 also offers the ability to allow other portable audio devices such as iPod shuffle, MP3, MiniDisc and
Portable CD Players to be connected for use as a speaker system.
1.
Remove the battery cover by sliding it upwards.
2.
Plug in the line in cable into the rear of the i-Station25 Line in Socket.
3.
Replace the battery compartment cover (Ensure the wire goes through the slot of the battery compartment cover)
4.
Connect the other end of the line in cable to your device.
5.
Set your device volume to Maximum.
6.
Turn on your i-Station.
Note: Remember to remove the line in cable when using the docking station as the line in cable will override
any sound coming from the docking station.
System Specifications
Total 8W output (4W / Channel)
Full range (40 mm) x 2 per Channel
Distortion <= 1 %
S/N ratio: 60dB
Frequency Response: 200Hz – 16k Hz
Provided Power Adaptor: 5VDC @ 2A
Video output is only compatible with the following:-
iPhone / iPhone3g :640 x 480 pixels (Max)
iPod touch / touch 2g: 640 x 480 pixels (Max)
iPod classic: 640 x 480 pixels (Max)
iPod nano 3g / 4g: 640 x 480 pixels (Max)
iPod 5g: 480 x 480 pixels (Max)
trouble shooting
Problem
i-Station does not turn ON when powered via AC Mains
i-Station does not turn ON when powered via Batteries
No sound
Sound Quality is poor
iPod/iPhone is not recharging
I have lost a part for the i-Station
All manuals and user guides at all-guides.com
Check the AC power cable is connected firmly into the AC wall outlet and the
i-Station.
Test the i-Station by powering the unit with 4 x AA batteries.
Test the i-Station by powering the unit via AC Mains, if this works replace the
batteries with new ones.
Ensure the line in cable is not plugged into the i-Station
Check Play status on the iPod/iPhone.
Please try updating the firmware for your iPod/iPhone using the latest iTunes
which is available from www.apple.com/ipod/download
Check i-Station is not in power save mode. Press any button to exit this mode
Check the MUTE function is not ON by pressing the MUTE on the remote
control
If you are using AA Batteries, replace them with new ones.
Ensure your i-Station is connected to the AC Mains
Please refer to the spare parts section in this manual
6
What should I do?
Publicité
