Télécharger Imprimer la page

Koolatron Bite Shield MK85 Manuel D'utilisation page 2

Piège à insectes volants pour montage mural à l'extérieur ou l'intérieur

Publicité

Les langues disponibles

Les langues disponibles

CONGRATULATIONS! Your new Bite Shield™ Flying Insect Trap incorporates the latest flying
insect attractant technologies, and will capture those annoying pests for more enjoyable living
either indoors or out! The Bite Shield™ product line is a leader in reducing mosquito and flying
insect populations, and we'd love to hear your comments. Let us know what you think of your
new Trap by emailing us at service@koolatron.com!
Read before unpacking and operating the BiteShield™ Wall Mount Trap.
PRODUCT DETAILS
1
2
3
4
5
6
See OPERATION directions on how to connect your adapter to both the Trap and wall outlet
INSTRUCTIONS FOR OCTENOL MOSQUITO ATTRACTANT
PRECAUTIONS
KEEP OUT OF REACH OF CHILDREN! Fatal or poisonous if swallowed. May irritate skin. Avoid
contact with skin. Causes eye irritation. DO NOT get in eyes. TOXICOLOGICAL INFORMATION -
Treat symptomatically.
1. Cut Foil Pack Open using Scissors. see Illustration A
2. Remove Octenol Cartridge from Foil Pack.
3. Hang on the built-in hook on the side of the unit. see Illustration B
4. Wash hands thoroughly.
5. For best performance, replace lure every 30-60 days.
Please see package for Cautions and Instructions. To order more
Octenol Cartridges please visit a retailer near you or visit us online
www.koolatron.com
YOUR NEW TRAP COMES WITH THE
FOLLOWING:
1. Screw and Anchor hardware for mounting on
sheet rock, wood or cement.
2. Your new Trap comes with a 4W UV Black
light bulb installed and ready for use.
3. Inside area around the UV bulb is pre-coated
with TiO
Titanium Dioxide which will remain
2
effective for the life of your Trap.
4. Easy-to-clean large capacity Catch Tray
comes pre-installed
5. Octenol Cartridge – for use when mosquitoes
are a problem (outdoor use only).
6. 110/120V Adapter Power Supply
POWER SUPPLY
• Input: 110/120V AC 60Hz
• Output: 12V DC @ 1000mA
A
B
2
SAFETY INSTRUCTIONS
Before installation, use or maintenance, always read
the safety instructions in this manual carefully.
• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of the Trap or any
other appliance!
• Dispose of all packaging materials properly when unpacking your new Flying Insect Trap.
• Remove all packaging materials from your new Trap. Keep all materials away from infants and small
children.
• Do not operate if the Trap appears damaged. Call Koolatron Customer Service at 1-800-265-8456.
• Do not connect the power cord to your Trap if water or moisture is present.
• Keep out of the reach of children.
• Do not put foreign objects into your Trap.
• Avoid looking directly into the UV light for any extended periods of time.
• Do not touch the fan during operation.
• Always disconnect from the outlet before cleaning.
• Avoid placing in direct sunlight.
• Dispose of all used attractant in a trash receptacle. Do not store near insect repellents or other
chemicals. Unopened attractant should be stored in a cool, dry place.
• The connection between the Trap and any approved extension cord used must be kept dry and off the
ground. If in doubt about electrical connections, please consult your local electric code.
• Disconnect the Trap from the power supply when not in use, before adding attractant cartridges,
before cleaning, before servicing or before putting in storage.
• Your Trap should be stored indoors when not in use and kept away from children.
• To avoid electric shock, DO NOT clean the Trap with spraying water or by immersion in water or other
liquid.
• All repairs to the Trap must be performed only by qualified service personnel.
• Read and follow all instructions prior to use of your new Trap.
• Young children should be carefully supervised when they are in the area of your Trap.
• Clothing or other flammable materials should not be hung from or placed on the Trap.
• Any guard or other protective device removed for servicing the Trap must be replaced prior to operating.
• Keep the area around your Trap clear and free from combustible materials, gasoline and other
flammable vapors and liquids.
• Do not handle the Trap when using insect repellents.
NOTE: Do not place your Trap on unstable surfaces or areas where it may tip over, or on electrical
appliances.
NOTICE TO USER: This pest control product is to be used only in accordance with the directions on the
label. It is an offence under the Pest Control Products Act to use this product in a way that is inconsis-
tent with the directions on the label. The user assumes the risk to persons or property that arises from
any such use of this product.
UNDERSTANDING ATTRACTING & TRAPPING PRINCIPLES
Your new Bite Shield™ Wall-Mount Flying Insect Trap combines multiple technologies to attract
not only flying insects, but allows you to target mosquito's when they are a problem!
• The 4W UV black light bulb emits ultraviolet rays at the 365nm wavelength, which creates a photo
catalytic reaction when it comes in contact with the Ti02 (Titanium Dioxide) coating inside the Trap.
• Octenol is a proven attractant to blood-seeking flying insects, and your Bite Shield™ Octenol cartridge
will last between 45 to 60 days.
All these technologies work together to attract Mosquito's and other flying insects to the Trap, where
they are pulled into the Capture Tray by a powerful fan, where they will dehydrate and die.
3

Publicité

loading