CDI Furniture LA1258 ZIXC Instructions D'assemblage

page 1/2
www.cdifurniture.com
Assembly Instructions
Style #: LA1258 ZIXC/ZICH
IMPORTANT SAFETY INSTRUCTIONS:
1: Use an authorized and certified electrician for consultation and
installation.
2: To avoid the risk of fire, do not exceed the recommended wattage
(Refer to our website).
3: The manufacturer and distributor do not accept liability for
incorrect installation.
4: For indoor use only.
5: Keep away from children.
WARNINGS:
1:Do not connect electricity supply until your floor lamp is fully
assembled and installed.
2:All wires already connected must not be modified in any way as
this may result in a bad connection. Do not remove the floor lamp
from its packaging by pulling on the power cord, as this may also
result in a bad connection.
3:To reduce the risk of fire, electrical shock, or personal injury,
always turn off the floor lamp and allow it to cool prior to replacing
light bulb. Do not touch bulb when fixture is turned on or look
directly at light bulb. Keep flammable materials away from light
bulb.
4:Deviation from instructions may result in a risk of fire or electric
shock.
TO ASSEMBLE:
1:Carefully remove all parts from the box and remove all plastic
covering.
2:First, position glass dishes <I> and then place candle sleeves <H>
3:Hang the crystals as per drawing on page 2.
4:Fasten the light bulbs to the lamp holders. (Bulbs not included).
5:Insert plug into socket and test floor lamp fixture.
CARE INSTRUCTIONS:
1:Make sure that the power is turned off and bulb has cooled before
handling.
2:Wipe clean with a dry cloth. Do not use corrosive cleaners.
3:The cable/cord of this floor lamp cannot be replaced (unless
otherwise advised). lf the cable is damaged, do not use the lamp.