Recommendations and Suggestions
The Instructions for Use apply to several versions of this appliance. Therefore, you may find
descriptions of individual features that do not apply to your specific appliance.
INSTALLATION
The manufacturer will not be held liable for any injury or damage resulting from
incorrect or improper installation.
The minimum safety distance between the cooker top and the extractor hood is
420 mm (this distance can be increased for some models, please refer to the
paragraphs on working dimensions and installation).
Check that the mains voltage corresponds to that indicated on the rating plate
fixed to the inside of the hood.
For Class I appliances, check that the domestic power supply guarantees ade-
quate earthing.
The route of the flue must be as short as possible.
Do not connect the extractor hood to exhaust ducts carrying combustion fumes
(boilers, fireplaces, etc.).
If the extractor is used in conjunction with non-electrical appliances (e.g. gas
burning appliances), a sufficient degree of aeration must be guaranteed in the
room in order to prevent the backflow of exhaust gas. The kitchen must have an
opening communicating directly with the open air in order to guarantee the entry
of clean air.
When the cooker hood is used in conjunction with appliances supplied with en-
ergy other than electric, in order to prevent fumes being drawn back into the ro-
om by the cooker hood, the negative pressure in the room must not exceed 0.04
mbar.
In the event of damage to the power cable, in order to prevent any risks, it must
be replaced by the manufacturer or by the technical service department.
All manuals and user guides at all-guides.com
EN.3