TEKTELIC COMMUNICATIONS T0004437 Manuel D'instructions page 17

All manuals and user guides at all-guides.com
The length of M4 mounting screw shall be determined according to the mounting surface
thickness. After accommodating for the locking hardware and mounting surface thicknesses,
the M4 mounting screws shall tread into the gateway chassis by at least 5 mm but not more
than 10 mm.
The Gateway Module mounting orientation is to be such that the chassis fins are vertical.
Ensure that the surface and related structure to which the Module is being mounted is secure
and able to support a dead load of at least 136 kg (300 lbs).
Ensure sufficient free space around the bulkhead connectors for access and cable ingress.
Figure 6: Pearl Mobile Gateway Module Mounting Points
Pearl Gateway User Manual T0004906 Version 1.6
TEKTELIC Communications Inc. Confidential Page 17 of 52