UFESA exprimidor X4935 Mode D'emploi page 13

non-observance of these warnings.
INSTRUCTIONS FOR USE
PULP QUANTITY REGULATOR:
This appliance has a system for regulating the quantity of pulp filtered
The quantity of pulp can be regulated by turning the small clip posted on the jar, in front of the handle.
USE:
Unroll the cable completely before plugging it in.
Fit the jar(D)onto the motor body(E)until it engages, fit the cone(B)into the strainer by pressing it until it
engages.
Connect the appliance to the mains
Cut the citrus fruit to be squeezed in half.
Turn on the appliance by pushing down on the piece of citrus fruit, once it has been placed on the juicing
cone.
To stop the appliance, simply stop applying pressure to the cone.
Remove the cone and strainer assembly in order to empty the jar.
Empty the jar of juice, tipping its contents into whatever table service receptacle you like
Note: if you process large quantities of fruit, you will need to clean the filter and remove the residual pulp
on a regular basis.
MAINTENANCE AND CLEANING
- Disconnect the appliance from the mains and let it cool before undertaking any cleaning task. - Clean
the equipment with a damp cloth with a few drops of washing-up liquid and then dry. - - Do not use
solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the
appliance.
- Do not submerge the appliance in water or any other liquid, or place it under a running tap.
- It is advisable to clean the appliance regularly and remove any food remains.
- If the appliance is not in good condition of cleanliness, its surface may degrade and inexorably affect
the duration of the appliance' s useful life and could become unsafe to use.
The appliance is suitable for cleaning in hot soapy water or in a dishwasher (using a soft cleaning
program):
- Jar
- Cone
- Filter
All manuals and user guides at all-guidesbox.com
13