Victron energy BlueSolar DUO Serie Manuel D'instructions page 3

All manuals and user guides at all-guides.com
1. DESCRIPTION
1.1 General
Series pass Pulse Width Modulation (PWM) charge voltage control
combined with a multistage charge control algorithm leads to
superior charging and enhanced battery performance. The filtered
PWM power control system uses highly efficient and reliable power
MOSFET transistors.
Fully automatic temperature compensation of charge voltage is
available to further improve charge control and battery performance.
The optional battery temperature sensor is built for long term
reliability.
1.2 Features
PWM controller.
Charges two separate batteries. For example the starter battery
and the service battery of a boat or mobile home.
Programmable charge current ratio (standard setting: equal
current to both batteries).
Charge voltage settings for three battery types.
Internal temperature sensor and optional remote temperature
sensor.
Protected against over current.
Protected against short circuit.
Protected against reverse polarity connection of the solar
panels and/or battery.
3