Thonet & Vander KURBIS BT Manuel D'opération page 13

All manuals and user guides at all-guides.com
KÜRBIS BT
TECHNICAL FEATURES
POWER OUTPUT: 60W RMS (30W + 30W)
FREQUENCY RESPONSE: 50Hz - 20kHz
DISTORTION: <0.1% - 1W
S/N: >65dB
SEPARATION: >40dB
ACOUSTIC BOX MATERIAL: Wooden box HDAA
ACOUSTIC BOX SIZE: 276 x 181 x 222 mm
DRIVER SIZE: Woofer 5.25"
DRIVER MATERIAL: Aramid Fiber
IMPEDANCE/POWER: 6 Ω 30W
TWEETER SIZE: 1"
TWEETER MATERIAL: Silk
IMPEDANCE/POWER: 4 Ω 20W
ANTIMAGNETIC SHIELD
CONTROLS: Volume, treble, bass
INPUTS: Bluetooth 4.0 (transmission distance: 32x *open
space)- 3.5 / RCA stereo
ACCESSORIES
_ Double 3.5mm RCA stereo auxiliary
_ Transparent cable for connecting passive speaker
_ Power cable (IEC 60320 C7)
_ Power cable with tab IEC 60320 C7 - UK plug BS 1363
*Included in certain countries.-
PAIRING MODE
Switch on the device. This will remain in pairing mode
automatically during the following 3 minutes. If there is
no pairing after this time, you must turn off and turn on
the speaker again to go back to pairing mode and attempt
another pairing.
EN
13