Salton Elite SEBS13 Instructions Et Garantie page 5

How to operate your hand blender
The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food as well as
for mixing drinks and milkshakes.
1. Insert the motor part (a) into the blender shaft (c) until it locks.
2. Introduce the hand blender in the vessel, and then press the on/off switch (b) to operate it.
You can operate the hand blender in the measuring beaker (d), and just as well in any other vessel.
How to operate your whisk
Use the whisk only for whipping cream, beating egg whites and mixing sponges and ready-mix desserts.
1. Insert the whisk (f) into the whisk gear box (e), and then insert the motor part (a) into the gear box until
it locks.
2. Place the whisk in a vessel and only then, press switch (b) to operate it.
For best results:
• Use a wide vessel.
• Only whip up to 400ml chilled cream.
• Only whip up to 4 egg whites.
• Move the whisk clockwise.
How to operate your chopper attachment
The chopper is perfectly suited for chopping cheese, onions, herbs, garlic, carrots, walnuts, almonds,
prunes etc.
N.B.:
Do not chop extremely hard food, such as nutmeg, coffee beans and grains.
Before chopping
• Pre-cut meat, cheese, onions, garlic, carrots (see processing guide).
• Remove stalks from herbs, un-shell nuts.
• Remove bones, tendons and gristle from meat.
For best results, please refer to the settings recommended in the processing guide.
Chopping
1. Carefully remove the plastic cover from the blade (b). Caution: the blade is very sharp! Always hold it
by the upper plastic part.
2. Place the blade on the centre pin of the chopper bowl (i). Always place the chopper bowl in the anti-
slip base (d).
3. Place the food in the chopper bowl (i).
4. Put the chopper gear box (g) on the chopper bowl (i).
5. Insert the motor part (a) into the gear box until it locks.
6. Press switch (b) to operate the chopper. During processing, hold the motor part with one hand and the
chopper bowl with the other.
7. After use, first remove the motor part (a), then the chopper gear box (g).
8. Carefully take out the blade.
9. Remove the processed food from the chopper bowl (i).
All manuals and user guides at all-guides.com