König SAS-SETIPC011W Mode D'emploi page 4

English
KIT CONTENT
x 1
Pan/Tilt Wireless IPcam Camera Antenna
Note:
For video recording, BE SURE TO use CLASS 10 memory card or above (not included). Other kinds of memory card may cause unexpected results and should be avoided.
HARDWARE OVERVIEW
Light Sensor
Lens
Infra red LEDs
Microphone
SETUP THE CAMERA
1. APP Download
Download and install the "OMGuard HD" APP to your device.
2. Power up The Camera
Power on the camera and wait until the GREEN LED indicator becomes steady on. This process would be finished within 45 seconds and make sure the LED is finished in GREEN.
3a. Wireless Connection
(1) In the Wi-Fi setting of your smart device. Choose the Wi-Fi router with prefix of HD-xxxxxx (xxxxxx=Camera ID
numbers). Enter the default password 12345678 and save the settings.
(2) Launch the APP, tap to add the camera.
(3) Tap (QR code icon) and scan the QR code label on the back of the camera to bring up the DID information. Or
tap "Search" to locate the camera.
(4) Enter the default password 123456 and save the settings.
(5) Later, APP will request user to modify default password to private password.
All manuals and user guides at all-guides.com
x 1
x 1
Power Adapter Motion PIR
(EU & UK)
SAS-SETIPC011W
Smart IPcam Set
x 1 x 1
Door / Window Sensor
SAS-CLALDW10
Reset
LAN Port
Micro SD Card Slot
Power LED
Power
SAS-CLALMS10
Antenna
2
4
x 1
x 1
Metal wall bracket Quick Start Guide
4
3