Publicité
Model No.: SF-3175
Vertical frame x2
L connector x8
L
Socket cap
screw
A
1. * Fix the L connector to the inside of frame A with a screw.
* Fix the R connector to the left side and M connector to
the right side of frame B with a flat screw.
* Fix the connectors to the frame C in the same order as
the frame B.
* Fix the R connector to the inside of frame D with a screw.
Causion:
* L connector for left side
* R connector for right side
* M connectors for extention only
3. Press one side corner into the frame and then others,
pat the panel corner in one by one.
All manuals and user guides at all-guides.com
Assembly Instructions
R connector x8
750 mm Steel
375 mm Steel
panel x7
panel x6
R
Socket cap
screw
B
Socket cap screw X16
M4 Hex screwdriver X1
750 mm Horizontal tube x8
2. Attach the horizontal tube to the connector and
then rotate it by 90 degrees by hand.
Causion:
*Make sure that the concave holes on both
sides of the horizontal tube are facing up.
*Make sure that screw holes of horizontal
tube 750 mm are facing inward.
4. Insert rubber stoppers for 750 mm floor
panels by hand into horizontal tubes.
Rubber
stopper x16
Publicité
