ASROCK B550 Phantom Gaming-ITX/ax Mode D'emploi page 32

Serial ATA3 Connectors
(SATA3_1_2:
see p.1, No. 8)
(SATA3_3_4:
see p.1, No. 9)
USB 2.0 Headers
(9-pin USB_1_2)
(see p.1, No. 12)
USB 3.2 Gen1 Header
(19-pin USB3_5_6)
(see p.1, No. 10)
Front Panel Type C USB
3.2 Gen2 Header
(20-pin USB32_TC_2)
(see p.1, No. 13)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.1, No. 17)
28
1
Dummy IntA_PA_D+
IntA_PB_D+ IntA_PA_D-
IntA_PB_D- GND
GND
IntA_PA_SSTX+
IntA_PB_SSTX+ IntA_PA_SSTX-
GND
IntA_PB_SSTX-
GND IntA_PA_SSRX+
IntA_PB_SSRX+ IntA_PA_SSRX-
IntA_PB_SSRX- Vbus
Vbus
USB Type-C Cable
1
MIC2_L
MIC2_R
OUT2_R MIC_RET
J_SENS E
OUT2_L
OUT_RET
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
There is one header on
this motherboard. This
USB 2.0 header can
support two ports.
There is one header on
this motherboard. This
USB 3.2 Gen1 header can
support two ports.
There is one Front
Panel Type C USB 3.2
Gen2 Header on this
motherboard. This header
is used for connecting a
USB 3.2 Gen2 module for
additional USB 3.2 Gen2
ports.
This header is for
connecting audio devices
GND
to the front audio panel.
PRESENCE#