Omnitronic VHF-250 Mode D'emploi page 15

1 Microphone grille
Protects the capsule and prevents „pop" noise.
2 On/off switch
To conserve the battery, turn off the microphone when not in use.
3 Power indicator
Glows when the microphone is on.
4 Battery indicator
When this light flashes, change the battery.
5 Mute switch
Mute the microphone to prevent sounds from being transmitted to the receiver.
6 Gain control
Adjust the microphone to match the loudness of your vocals.
7 Battery cover
Unscrews to insert or change a 9 V battery and acess the gain control.
15/34 00026496.DOC, Version 1.3