goliath G-TOOLS Manuel De L'utilisateur

EN
GOLIATH TOOLS
USER'S MANUAL
YOU WILL FIND IN THE BOX:
2 "U" shaped legs
2 unmounted trays
1 rubber mat for upper tray 4 wheels
12 Allen screws m-8
2
1 LEGS
2
TRAYS
3
WHEELS
DESCRIPTION AND TECHNICAL FEATURES:
Work trolley to transport and stock tools
Utility of 2 trays with wheels
Maximum weight to bear: 25kgs per tray
G-TOOLS
1
3
ASSEMBLY INSTRUCTIONS:
Each leg has 4 holes on the side to t the Allen screws m-8.
To proceed with the assembly, this screw is threaded to the end of the tray as indicated in photo 1.
1 - Proceed to assemble the trays without tightening the screws too tightly.
2 - Proceed to mount the wheels by tightening the screws strongly (photo 2).
3 - Once the trolley is assembled, stand it on a at oor, loosen the screws of the trays, this will make the ends
of the legs with the wheels sit well on the oor plane. Then proceed to tighten all the screws gradually, once
this operation has been carried out, check that the trolley is properly seated on the oor and does not limp, if it
limps, repeat the operation.
4 - This cart has 2 extra accessories, the drawer (G-AC006) and the desk tray (G-AC005),
if you have also ordered one or both accessories; their mounting on the cart is
indicated in the instructions of each accessory.
INSTRUCTIONS FOR USE:
The trolley is designed with a certain height for ergonomic use. It's an ideal
companion for workshops with open spaces making it easier to have tools near the
repair stand without having to travel to the nearest workbench.
HAZARD WARNINGS IN THE USE OF GOLIATH TOOLS:
1 - Do not load more than 25 kilos per tray.
2 - Make sure that if the load is extreme, it is as centered as possible, with this, we
will avoid overturning the car.
3 – Goliath-Tools cart should not be operated by children.
MAINTENANCE:
1 - The cart does not need any speci c maintenance.
2 – After working with the cart for a long period it is possible that the screws
loosen, in the event that you detect this, proceed to tighten them until the cart is
rigid and stable.
3 - The rubber mat is prepared for the entire useful life of the cart, in the event that
due to any improper use it deteriorates and should be replaced, they have no
guarantee.
Foto 1
Foto 2